Manufactured homes heat pumps

Qualification:

Ensure the home qualifies:

• Must be existing single family home, new construction is not eligible for this incentive.
• Gas, oil, wood heating, pellet stoves, and propane system conversions do not qualify

Requirements for all heat pump installations:

• Equipment must be installed according to the specifications outlines in the Washington Technical Specifications Manual
• Equipment must be listed on the AHRI (Air Conditioning, Heating and Refrigeration Institute) Certified Directory: ahridirectory.org
• Work completed must comply with all building codes and standards
• May apply for only one of these incentives per heat pump
• Work must be completed by a Program-Qualified HVAC Contractor listed on the Program-Eligible HVAC Contractor List.

Additional requirements for heat pump to heat pump upgrade:

• Minimum 9.0 HSPF (Heating Seasonal Performance Factor)
• Previous primary heat source must have been a permanently installed ducted heat pump  that serves at least 80% of the home’s conditioned living space
• Equipment must be a new air-source split or packaged unitary heat pump with an AHRI Standard Rating Cooling Capacity of 65,000 BTU/hr. (5.4 tons) or less
• New heat pump must be the current primary heat source
• Must include Best Practice Installation and Sizing
• Homes 3,500 square feet or less may qualify for one unit, while homes greater than 3,500 square feet may qualify for two units; homes greater than 3,500 square feet requiring more than two units may apply for additional incentives (additional documentation required, subject to program approval)

Additional requirements for heat pump conversion:

• Minimum Federal Standard HSPF
• Work must be completed by a Program-Qualified HVAC Contractor listed on the Program-Eligible HVAC Contractor List. 
• Previous primary heat source must have been a permanently installed electric resistance heat system (electric baseboard, electric furnace, electric ceiling/wall heat)
• Incentive not offered to customers replacing an existing ducted heat pump
• Equipment must be a new air-source split or packaged unitary heat pump with an AHRI Standard Cooling Capacity of 65,00 BTU/hr.  (5.4 tons) or less
• New heat pump must be the current primary heat source
• Must include Best Practice Installation and Sizing
• Homes 3,500 square feet or less may qualify for one unit, while homes greater than 3,500 square feet may qualify for two units; homes greater than 3,500 square feet requiring more than two units may apply for additional incentives (additional documentation required, subject to program approval)

Additional requirements for commissioning control and sizing:

• Minimum Federal Standard HSPF

Additional program requirements:

• Incentive amount may not exceed the total cost of the project
• All required documents must be submitted within 90 days of the service completion date

Required documents include:

• Heat Pump Application, completed and signed*
• Itemized receipt/contractor invoice, must include:
  • Product and/or installation costs (materials, labor, service)
  • Model numbers; indoor and outdoor
  • Date work initiated
  • Date work completed
  • Trade ally business name
• Manual J load or equivalent load calculation
• AHRI Certificate (only for heat pump upgrade and heat pump conversion)
• Third Party Payment Addendum for applicants who would like to forward payment to a third party not listed on the utility account
• IRS W9 Form, if applicable**

*If mailing, please make copies for your records and note the date mailed on the application
**Applicable only to businesses and non-individual customers, including landlords, applying for incentives

Incentives are associated with the Home Energy Savings program January 1, 2019 tariff filing approved by the Washington Utilities and Transportation Commission. All incentives are subject to change with 45 days notice. Additional terms and conditions may apply.

Residential electric customers residing in the state of Washington who purchase their electricity from Pacific Power on rate schedules 16, 17 or 18 qualify. Landlords who own rental properties served by the company in the state of Washington where the tenant is billed on rate schedules 16, 17 or 18 also qualify for this program. You can locate your rate schedule on your bill or by calling 1-888-221-7070. Incentive checks are only issued in the name of the Pacific Power account holder.

Prior to starting a project, find a contractor on the Washington Qualified Contractor list. Note that select incentives must be completed by a Qualified Contractor. Review the incentive application with your contractor to determine eligibility requirements, incentive qualifications and review the list of required documents to submit for an incentive.

Incentive Application and required documents must be postmarked within 90 days of the work completed date. Incentive checks are issued within 45 days of receipt of the completed and approved incentive application. Checks are only payable to the account holder. Incentives are not to exceed the purchase price of the equipment or service. Equipment and service work may be inspected for compliance. Incentives are subject to California Public Utilities Commission approval and may change with 45 days notice. Additional terms and conditions may apply.

Have you already applied? Track your incentive status. Please allow 48 hours for your application to load in our system.